PSSVG

SVG.set

Synopsis

Creates SVG set elements


Description

The SVG <set> element provides a simple means of just setting the value of an attribute for a specified duration.

It supports all attribute types, including those that cannot reasonably be interpolated, such as string and boolean values. For attributes that can be reasonably be interpolated, the animate is usually preferred.

Note: The <set> element is non-additive. The additive and accumulate attributes are not allowed, and will be ignored if specified.



Parameters

Content

The Contents of the set element

Type Required Position PipelineInput Aliases
[Object] false 1 true (ByValue, ByPropertyName) InputObject
Text
InnerText
Contents

Data

A dictionary containing data. This data will be embedded in data- attributes.

Type Required Position PipelineInput Aliases
[IDictionary] false named true (ByPropertyName) DataAttribute
DataAttributes

On

A dictionary or object containing event handlers. Each key or property name will be the name of the event Each value will be the handler.

Type Required Position PipelineInput
[Object] false named true (ByPropertyName)

Attribute

A dictionary of attributes. This can set any attribute not exposed in other parameters.

Type Required Position PipelineInput Aliases
[IDictionary] false named true (ByPropertyName) SVGAttributes
SVGAttribute

Comment

A comment that will appear before the element.

Type Required Position PipelineInput Aliases
[String] false named true (ByPropertyName) Comments

Children

One or more child elements. These will be treated as if they were content.

Type Required Position PipelineInput Aliases
[PSObject] false named true (ByPropertyName) Child

To

This attribute defines the value to be applied to the target attribute for the duration of the animation. The value must match the requirements of the target attribute.

Type Required Position PipelineInput
[PSObject] false named true (ByPropertyName)

Href

The href attribute defines a link to a resource as a reference URL. The exact meaning of that link depends on the context of each element using it.

Note: Specifications before SVG 2 defined an xlink:href attribute, which is now rendered obsolete by the href attribute. If you need to support earlier browser versions, the deprecated xlink:href attribute can be used as a fallback in addition to the href attribute, e.g. <use href="some-id" xlink:href="some-id" x="5" y="5" />.

Type Required Position PipelineInput
[PSObject] false named true (ByPropertyName)

AttributeType

The attributeType attribute specifies the namespace in which the target attribute and its associated values are defined.

Type Required Position PipelineInput
[PSObject] false named true (ByPropertyName)

AttributeName

The attributeName attribute indicates the name of the CSS property or attribute of the target element that is going to be changed during an animation.

Type Required Position PipelineInput
[PSObject] false named true (ByPropertyName)

Begin

The begin attribute defines when an animation should begin.

The attribute value is a semicolon separated list of values. The interpretation of a list of start times is detailed in the SMIL specification in “Evaluation of begin and end time lists”. Each individual value can be one of the following: <offset-value>, <syncbase-value>, <event-value>, <repeat-value>, <accessKey-value>, <wallclock-sync-value> or the keyword indefinite.

Type Required Position PipelineInput
[PSObject] false named true (ByPropertyName)

Dur

The dur attribute indicates the simple duration of an animation.

Type Required Position PipelineInput Aliases
[PSObject] false named true (ByPropertyName) Duration

End

The end attribute defines an end value for the animation that can constrain the active duration.

Type Required Position PipelineInput
[PSObject] false named true (ByPropertyName)

Min

The min attribute specifies the minimum value of the active animation duration.

Type Required Position PipelineInput
[PSObject] false named true (ByPropertyName)

Max

The max attribute specifies the maximum value of the active animation duration.

Type Required Position PipelineInput
[PSObject] false named true (ByPropertyName)

Restart

The restart attribute specifies whether or not an animation can restart.

Type Required Position PipelineInput
[PSObject] false named true (ByPropertyName)

RepeatCount

The repeatCount attribute indicates the number of times an animation will take place.

Type Required Position PipelineInput
[PSObject] false named true (ByPropertyName)

RepeatDur

The repeatDur attribute specifies the total duration for repeating an animation.

Type Required Position PipelineInput
[PSObject] false named true (ByPropertyName)

Fill

The fill attribute has two different meanings. For shapes and text it’s a presentation attribute that defines the color (or any SVG paint servers like gradients or patterns) used to paint the element; for animation it defines the final state of the animation.

Type Required Position PipelineInput
[PSObject] false named true (ByPropertyName)

CalcMode

The calcMode attribute specifies the interpolation mode for the animation.

The default mode is linear, however if the attribute does not support linear interpolation (e.g. for strings), the calcMode attribute is ignored and discrete interpolation is used.

Type Required Position PipelineInput
[PSObject] false named true (ByPropertyName)

Values

The values attribute has different meanings, depending upon the context where it’s used, either it defines a sequence of values used over the course of an animation, or it’s a list of numbers for a color matrix, which is interpreted differently depending on the type of color change to be performed.

Type Required Position PipelineInput
[PSObject] false named true (ByPropertyName)

KeyTimes

The keyTimes attribute represents a list of time values used to control the pacing of the animation.

Each time in the list corresponds to a value in the values attribute list, and defines when the value is used in the animation. Each time value in the keyTimes list is specified as a floating point value between 0 and 1 (inclusive), representing a proportional offset into the duration of the animation element.

Type Required Position PipelineInput
[PSObject] false named true (ByPropertyName)

KeySplines

The keySplines attribute defines a set of Bézier curve control points associated with the keyTimes list, defining a cubic Bézier function that controls interval pacing.

This attribute is ignored unless the calcMode attribute is set to spline.

If there are any errors in the keySplines specification (bad values, too many or too few values), the animation will not occur.

Type Required Position PipelineInput
[PSObject] false named true (ByPropertyName)

From

The from attribute indicates the initial value of the attribute that will be modified during the animation.

When used with the to attribute, the animation will change the modified attribute from the from value to the to value. When used with the by attribute, the animation will change the attribute relatively from the from value by the value specified in by.

Type Required Position PipelineInput
[PSObject] false named true (ByPropertyName)

By

The by attribute specifies a relative offset value for an attribute that will be modified during an animation.

The starting value for the attribute is either indicated by specifying it as value for the attribute given in the attributeName or the from attribute.

Type Required Position PipelineInput
[PSObject] false named true (ByPropertyName)

Additive

The additive attribute controls whether or not an animation is additive.

It is frequently useful to define animation as an offset or delta to an attribute’s value, rather than as absolute values.

Type Required Position PipelineInput
[PSObject] false named true (ByPropertyName)

Accumulate

The accumulate attribute controls whether or not an animation is cumulative.

It is frequently useful for repeated animations to build upon the previous results, accumulating with each iteration. This attribute said to the animation if the value is added to the previous animated attribute’s value on each iteration.

Type Required Position PipelineInput
[PSObject] false named true (ByPropertyName)

Id

The id attribute assigns a unique name to an element.

You can use this attribute with any SVG element.

Type Required Position PipelineInput
[PSObject] false named true (ByPropertyName)

Lang

The lang attribute specifies the primary language used in contents and attributes containing text content of particular elements.

There is also an xml:lang attribute (with namespace). If both of them are defined, the one with namespace is used and the one without is ignored.

In SVG 1.1 there was a lang attribute defined with a different meaning and only applying to glyph elements. That attribute specified a list of languages according to . The glyph was meant to be used if the xml:lang attribute exactly matched one of the languages given in the value of this parameter, or if the xml:lang attribute exactly equaled a prefix of one of the languages given in the value of this parameter such that the first tag character following the prefix was “-“.

You can use this attribute with any SVG element.

Type Required Position PipelineInput
[PSObject] false named true (ByPropertyName)

Tabindex

The tabindex attribute allows you to control whether an element is focusable and to define the relative order of the element for the purposes of sequential focus navigation.

You can use this attribute with any SVG element.

Type Required Position PipelineInput
[PSObject] false named true (ByPropertyName)

XmlBase

The xml:base attribute specifies a base IRI other than the base IRI of the document or external entity.

You can use this attribute with any SVG element.

Type Required Position PipelineInput
[PSObject] false named true (ByPropertyName)

XmlLang

The xml:lang attribute specifies the primary language used in contents and attributes containing text content of particular elements.

It is a universal attribute allowed in all XML dialects to mark up the natural human language that an element contains.

There is also a lang attribute (without namespace). If both of them are defined, the one with namespace is used and the one without is ignored.

You can use this attribute with any SVG element.

Type Required Position PipelineInput
[PSObject] false named true (ByPropertyName)

XmlSpace

SVG supports the built-in XML xml:space attribute to handle whitespace characters inside elements. Child elements inside an element may also have an xml:space attribute that overrides the parent’s one.

Note: Instead of using the xml:space attribute, use the white-space CSS property.

This attribute influences how browsers parse text content and therefore changes the way the DOM is built. Therefore, changing this attribute’s value through the DOM API may have no effect.

You can use this attribute with any SVG element.

Type Required Position PipelineInput
[PSObject] false named true (ByPropertyName)

Class

« SVG Attribute reference home

Assigns a class name or set of class names to an element. You may assign the same class name or names to any number of elements, however, multiple class names must be separated by whitespace characters.

An element’s class name serves two key roles:

You can use this class to style SVG content using CSS.

Type Required Position PipelineInput
[PSObject] false named true (ByPropertyName)

Style

The style attribute allows to style an element using CSS declarations. It functions identically to the style attribute in HTML.

You can use this attribute with any SVG element.

Type Required Position PipelineInput
[PSObject] false named true (ByPropertyName)

Outputs


Syntax

SVG.set [[-Content] <Object>] [-Data <IDictionary>] [-On <Object>] [-Attribute <IDictionary>] [-Comment <String>] [-Children <PSObject>] [-To <PSObject>] [-Href <PSObject>] [-AttributeType <PSObject>] [-AttributeName <PSObject>] [-Begin <PSObject>] [-Dur <PSObject>] [-End <PSObject>] [-Min <PSObject>] [-Max <PSObject>] [-Restart <PSObject>] [-RepeatCount <PSObject>] [-RepeatDur <PSObject>] [-Fill <PSObject>] [-CalcMode <PSObject>] [-Values <PSObject>] [-KeyTimes <PSObject>] [-KeySplines <PSObject>] [-From <PSObject>] [-By <PSObject>] [-Additive <PSObject>] [-Accumulate <PSObject>] [-Id <PSObject>] [-Lang <PSObject>] [-Tabindex <PSObject>] [-XmlBase <PSObject>] [-XmlLang <PSObject>] [-XmlSpace <PSObject>] [-Class <PSObject>] [-Style <PSObject>] [<CommonParameters>]